PRODUCTS
Product Introduction:
This product is prepared using water-based acrylic functional lotion, nano functional materials, anti-rust pigments, corrosion inhibitors, and additives. The coating dries quickly, has a low odor, and offers high cost-effectiveness; it boasts excellent film hardness and adhesion; it has strong weather resistance and good water resistance, making it suitable for general anti-rust requirements.
Application fields:
Suitable for products with general anti-rust requirements while emphasizing decorativeness, it maintains good anti-corrosion performance in mildly corrosive environments. It is used for general and temporary protection, such as engineering tracks, leaf springs, outdoor railings, and pipelines.
Technical Specifications:
project | parameter |
color | Red, white, etc. |
solid content·% | ≥42 |
finenessμm | ≤25 |
gloss(60º) | 30 |
Hardness (pencil) | ≥HB |
impact resistance·kg·cm | 50 |
Bend Test·mm | ≥1 |
adhesion·≤ | 1级 |
salt spray resistance·≥ | 168h |
weather resistance·≥ | 500h |
water resistance·≥ | No blistering or peeling for 72 hours |
temperature | 5℃ | 15℃ | 25℃ | 35℃ | |
Natural drying time (Dry film 30 μ m, humidity 50%) | Table dry | 1h | 0.2h | 0.2h | 0.1h |
action-oriented | 6h | 3h | 3h | 3h | |
Painting kit:
Painting 1: Water-based acrylic primer and topcoat in one
Construction process:
Before painting, the painted surface must be treated to ensure that it is free of all contaminants such as oil stains, rust, dust, and impurities, and the substrate must be clean and dry;
Before painting, the paint should be mixed and stirred evenly according to the required ratio. To adjust the spraying viscosity, deionized water within 10%-20% of the mixture can be added according to the corresponding ratio, and the mixture should be stirred thoroughly.
3. The spraying methods can be spraying, rolling, and brushing; during the acrylic acid construction process, it must not come into contact with water, acid, alcohol, alkali, etc.
4. Construction should be carried out on days with a relative air humidity of less than 85%. Operation should be avoided during rain, snow, fog, and strong winds. The coating humidity should be between 5℃ and 40℃.
Storage and transportation:
1. The product should be stored in a cool and ventilated place, protected from direct sunlight, and isolated in a fire-safe warehouse. The storage temperature should be maintained within the range of 5℃ to 35℃.
During transportation, care should be taken to protect the product from severe cold, rain, direct sunlight, and collisions, which can cause quality loss. Additionally, transportation must comply with relevant national laws and regulations.
3. Under the above storage conditions, the product has a shelf life of at least 6 months; if it exceeds the shelf life, it can be tested according to the above indicators, and if it meets the technical indicator requirements, it can still be used.
Notes:
The construction site is well-ventilated, so wear a protective mask when spraying.
