Product Introduction:
This product is a water-based, environmentally friendly product made from raw materials such as polyester, additives, and matte powder. It boasts excellent adhesion, strong comprehensive performance, a special hand feel, good flexibility and toughness, as well as superior weather resistance, water resistance, wear resistance, and solvent resistance.
Application fields:
This product can be applied to engineering plastic materials such as ABS, PC, PVC, and PET, as well as metal parts, stainless steel, aluminum parts, and aluminum-magnesium alloys. It is suitable for surface coating with a tactile effect, such as in electrical tools, pens, helmets, mobile phones, and household appliances.
Technical Specifications:
Appearance of lacquer liquid | Uniform, no foreign matter |
Film appearance | Smooth and even, without particles |
baking conditions | 70℃，30min |
hardness | F does not break |
impact strength，cm | 30 |
gloss（60°） | 10 |
wear resistance | No paint peeling, no exposed substrate, no softening, or other undesirable phenomena |
Resistant to butanone wiping | No adverse phenomena such as whitening, discoloration, or softening |
water resistance | No blistering, wrinkling, or peeling at room temperature for 200 hours |
Painting process:
1. The mixing ratio for using this product is: Component A: Component B: Water = 1:0.2:0.2
2. Paint mixing method: First, stir the curing agent and paint evenly, then add water and stir evenly to adjust the spray viscosity. Spray it on an ABS standard board, with a dry film thickness of 18-22μm
Storage and transportation:
1. The product should be stored in a cool and ventilated place, protected from direct sunlight, and isolated in a warehouse away from sources of ignition. The storage temperature should be maintained within the range of 5℃ to 35℃.
During transportation, care should be taken to protect the product from severe cold, rain, direct sunlight, and collisions, which can cause quality loss. Additionally, transportation must comply with relevant national laws and regulations.
3. Under the above storage conditions, the product has a shelf life of at least 6 months; if it exceeds the shelf life, it can be tested according to the above indicators, and if it meets the technical specifications, it can still be used.
Notes:
The construction site is well-ventilated, and it is necessary to wear a protective mask during spraying.
